Water Hook Up

The city water is provided at the campsite with a full hookup and will not fill or deplete your fresh water tank.

City Water Connection
  1. Remove white fresh water hose from the RV storage and attach one end to the campsite water supply.
  2. Open valve and drain some water for a few seconds to remove rusty water and clean the hose.
  3. Locate outside connection for the city water hookup on the side of the RV and attach one end of the hose.
  4. Open the campsite water supply 1/3 and check both ends for leaks.

Fresh Water Tank Fill

  1. Connect the water hose to a water source.
  2. Open valve and drain some water for a few seconds to remove rusty water and clean the hose and close valve.
  3. Insert the other end into the RV fresh water inlet.
  4. Open the campsite water valve part way and fill the tank slowly.
  5. Once the tank is full, water will start flowing back out of the filler hole.

*To access the water in the fresh water tank use the water pump. The water pump switch is on the monitor panel. The water in the fresh water tank is safe for cooking and cleaning. We recommend bottled water for drinking.